How to Programme a ST50EVOB/C Sectional Garage Door Opener & Handset

HOW TO PROGRAMME ST50EVOB/C HANDSETS

To Code Additional Handsets:

  • Press and hold the button① on the handset you would like to code to the unit.
  • Locate the “S” button② under the light cover④.
  • Press and release the “S” button② on the unit.
  • The LED light③ on the unit will flash to confirm learning of the handset.
  • Release the button① on the handset.

To Erase All Handsets:

  • Locate the “S” button② under the light cover④.
  • Press and hold the “S” button②.
  • Green indicator LED light③ will come on.
  • Continue to hold for a further 8 – 10 seconds.
  • Green indicator LED light③ will go off.
  • Release “S” button② all codes are erased.

MANUALLY OPERATING ST50EVOB/C OPENERS

DO NOT USE THE RED HANDLE⑤ TO OPEN AND CLOSE THE GARAGE DOOR

To Disengage the Garage Door:

  • Pull and hold the red manual release rope⑤.
  • Move the garage door slightly—this will disengage the garage door from the trolley⑥.
  • Release the red manual release rope⑥.
  • The garage door can now be opened by hand.

To Re-engage the Garage Door:

Either

  • Move the garage door back to the original position it was disengaged from, the trolley⑥ will automatically re-engage.
  • Operate the unit via remote, when the trolley⑥ passes the garage door position it will automatically re-engage.
garage door melbourne
Call Us Now