How to Programme a ST50EVOB/C Sectional Garage Door Opener & Handset

HOW TO PROGRAMME ST50EVOB/C HANDSETS

To Code Additional Handsets
Press and hold the button① on the handset you would like to code to the unit.
Locate the “S” button② under the light cover④.
Press and release the “S” button② on the unit.
The LED light③ on the unit will flash to confirm learning of the handset.
Release the button① on the handset.

To Erase All Handsets
Locate the “S” button② under the light cover④.
Press and hold the “S” button②.
Green indicator LED light③ will come on.
Continue to hold for a further 8 – 10 seconds.
Green indicator LED light③ will go off.
Release “S” button② all codes are erased.

MANUALLY OPERATING ST50EVOB/C OPENERS

DO NOT USE THE RED HANDLE⑤ TO OPEN AND CLOSE THE GARAGE DOOR

To Disengage the Garage Door
Pull and hold the red manual release rope⑤.
Move the garage door slightly—this will disengage the garage door from the trolley⑥.
Release the red manual release rope⑥.
The garage door can now be opened by hand.

To Re-engage the Garage Door
Either
Move the garage door back to the original position it was disengaged from, the trolley⑥ will automatically re-engage.
Operate the unit via remote, when the trolley⑥ passes the garage door position it will automatically re-engage.

garage door melbourne